Material Safety Data Sheet
Home
SECTION 1: CHEMICAL PRODUCT - COMPANY IDENTIFICATION

Shellco International, Inc.
38 Sweet Leaf Court
The Woodlands, TX 77381
(281) 296-2922

(800) 424-9300 - CHEMTREC (24 Hours Emergency Response)

TRADE NAME/SYNONYM: Shellco-Stop XL
CHEMICAL FAMILY: Gelled Calcium Chloride Brine
MSDS CREATION DATE: January 22, 2001
MSDS REVISION DATE:


SECTION 2: COMPOSITION, INFORMATION ON INGREDIENTS

COMPONENTS: Proprietary
CAS NUMBER: NA
PROBABLE CONTAMINANTS: Not known


SECTION 3: HAZARDS IDENTIFICATION

Hazardous Components CAS No. Wt. % PEL/STEL
NA NA NA NA


SECTION 4: FIRST AID MEASURES

INHALATION: Remove to fresh air
SKIN CONTACT: Wash with soap and water
EYE CONTACT: Immediately flush with running water for at least 15 minutes.
INGESTION: Call a physician and dilute or induce vomiting as directed.


SECTION 5: FIRE FIGHTING MEASURES

FIRE AND EXPLOSION HAZARD: This material may burn, but it does not readily ignite.
EXTINGUISHING MEDIA: Dry chemical, carbon dioxide, water spray, or regular foam.
FIREFIGHTING: HAZARDOUS COMBUSTION PRODUCTS: Move container from fire area if you can do it without risk. Apply cooling water to sides of containers that are exposed ato flames until well after the fire is out. Stay away from ends of container.
SECTION 6: ACCIDENTAL RELEASE MEASURES

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Stop leak if you can do it without risk. Take up with sand or other noncombustible absorbent material and place in containers for later disposal.


SECTION 7: HANDLING AND STORAGE

Observe all federal, state, and local regulations when storing this liquid. Store away from incompatible substances.


SECTION 8: EXPOSURE CONTROLS, PERSONAL PROTECTION

EXPOSURE LIMITS: No occupational exposure limits established by OSHA/ACGIH/NIOSH

VENTILATION: Provide local exhaust or process enclosure ventilation to meet published exposure limits.

EYE PROTECTION: Wear safety glasses with splash shields or safety goggles/shield to prevent contact with this liquid.

EMERGENCY WASH FACILITIES: The employer should provide an eye wash fountain and quick drench shower within the immediate work area for emergency use.

CLOTHING: Wear appropriate protective (impervious) clothing and equipment to prevent repeated or prolonged skin contact with this liquid.

GLOVES: Wear appropriate protective gloves to prevent contact with this liquid.
RESPIRATOR: The respirator selected must be based on contamination levels found in the work place and specific to the job assignment. Do not exceed the working limits of the respirator. Respirators must also be jointly approved by the National Institute for Occupational Safety and Health and the Mine Safety and Health Administration (NIOSH-MSHA).

FOR FIREFIGHTING AND OTHER IMMEDIATELY DANGEROUS TO LIFE OR HEALTH
CONDITIONS: Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode. Any supplied-air respirator that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode in combination with an auxiliary self-contained breathing apparatus operated in pressure-demand or other positive-pressure mode.


SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

DESCRIPTION: Fluid Gelatinous Mass (Like Frog Eggs)
BOILING POINT: ND
SPECIFIC GRAVITY: 1.3058 1.3358
WATER SOLUBILITY: Soluble
VAPOR DENSITY (Air = 1): ND
EVAPORATION RATE (Ethyl Ether = 1): ND
pH: 7.5 - 10

SECTION 10: STABILITY AND REACTIVITY

REACTIVITY: Stable.
CONDITIONS TO AVOID: Open Flames, Sparks
INCOMPATIBILITIES: Strong Oxidizers
HAZARDOUS DECOMPOSITION: Oxides of Carbon and Phosphorous
POLYMERIZATION: Will not occur

SECTION 11: DISPOSAL INFORMATION:

Observe all federal, state and local regulations when disposing of this liquid.

SECTION 12: TRANSPORT INFORMATION

US DOT SHIPPING NAME-ID NUMBER: Non-regulated

SECTION 13: OTHER INFORMATION

Personnel handling this product should be informed of the recommended safety precautions and should have access to this information.
This information relates to the specific material designated and may not be valid for such material used in combination with other materials or processes. Such information is to the best of our knowledge and belief, accurate and reliable as of the date compiled. However, no representation, warranty or guarantee is made as to its accuracy, reliability, or completeness. It is the user's responsibility to satisfy themselves as to the suitability and completeness of such information for their own use and purpose. We do not accept liability for any loss or damage that may occur from the use of this information nor do we offer warranty against patent infringement.
Shellco International, Inc. reserves the right to refuse shipment of this material to any person or organization who, in the judgement of Shellco International, Inc., does not demonstrate the ability to consistently handle and use it safely and in compliance with all applicable laws, rules and regulations.
Customers are responsible for compliance with local, state, and federal regulations that may be pertinent in the storage, application, and disposal of this product.